NCP301LSN16T1G Overview

Power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SOT-23-5 Thin, TSOT-23-5 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.5V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. This power management has 5 pins. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 500nA. A similar IC managements number of the manufacturer can always be found by using NCP301, the base power ics number.

NCP301LSN16T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP301LSN16T1G Applications

There are a lot of ON Semiconductor NCP301LSN16T1G Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Radar
• Microprocessor system
• Electric heating appliances
• Detection of phase loss
• Power distribution systems of ICU
• Transformer load monitoring equipment
• Power distribution systems of operating room
• Radio
• Multi-voltage system