NCP302HSN27T1G Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 1.5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. It has a total of 5 pins that are attached to IC management. The pins of the power management system count 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 500nA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using NCP302, the base power ics number. Voltage supervisor can work with a supply temperature of 1.3μA at the most.

NCP302HSN27T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP302HSN27T1G Applications

There are a lot of ON Semiconductor NCP302HSN27T1G Voltage Supervisors applications.

• Embedded computing
• Data storage applications
• Important electronics for automotive protection
• Transformer load monitoring equipment
• Power distribution systems of CCU
• Medical-specific insulation monitor
• Battery-powered equipment
• Telecommunications equipment
• Radar
• Power distribution systems of infant care room