NCP302HSN40T1G Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-23-5 Thin, TSOT-23-5 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1.5V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 5 pins. The pins of the power management system count 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 500nA. As well as this, there are other features to mention such as [0], for example. It is always advisable to use NCP302, the base supervisor number, when searching for similar PMICs from the manufacturer.

NCP302HSN40T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP302HSN40T1G Applications

There are a lot of ON Semiconductor NCP302HSN40T1G Voltage Supervisors applications.

• Precision measurement
• FPGA design
• Digitally controlled LDO regulators circuit
• Functional modules
• Power distribution systems of CCU
• DSP
• Efficient information transmission
• Utility meter
• Kitchen appliances
• Magnetic resonance imaging