NCP302HSN45T1G Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find SOT-23-5 Thin, TSOT-23-5 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 1.5V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. 5 pins are present in total in this power management. There are 5 pins on the supervisor. IC management can only work with a supply voltage of 800mV volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 500nA. For similar manage ics search of the manufacturer, you can always refer to NCP302, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 1.4μA.

NCP302HSN45T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP302HSN45T1G Applications

There are a lot of ON Semiconductor NCP302HSN45T1G Voltage Supervisors applications.

• Radar
• Solar power charger
• Leakage protection
• Consumer electronics
• Medical-specific isolation transformer
• DSP
• Medical-specific insulation monitor
• Fire equipment power monitoring system
• DVR
• Refrigeration