NCP303LSN22T1G Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of SOT-23-5 Thin, TSOT-23-5 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.5V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. 5 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 500nA. You can always use NCP303, the base supervisor number, to search for similar PMICs of the manufacturer.

NCP303LSN22T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN22T1G Applications

There are a lot of ON Semiconductor NCP303LSN22T1G Voltage Supervisors applications.

• Solar power charger
• Automotive permanent magnet synchronous motors
• Embedded computing
• Display equipment
• DC stabilized power supply module
• Personal computers
• Military electronics
• DSP
• Analog circuit
• Urban rail transit weak current power monitoring