NCP303LSN25T1 Overview

As you can see, this power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SOT-23-5 Thin, TSOT-23-5 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 240. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 5 pins in it. 5 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 500nA is the recommended value. To find similar IC managements from the manufacturer, you can always search by NCP303.

NCP303LSN25T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN25T1 Applications

There are a lot of ON Semiconductor NCP303LSN25T1 Voltage Supervisors applications.

• Battery cars
• Leakage protection
• Important electronics for automotive safety
• Power distribution systems of operating room
• Electronics installed in the vehicle
• Insulation fault location system
• Sensitive sensors
• Microprocessor system
• Important electronics for automotive protection
• DSP