NCP303LSN26T1G Overview

This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SOT-23-5 Thin, TSOT-23-5 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. When 1.5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. Pin count of the power management is 5. It is recommended that Vsup should not be less than 800mV for this IC power. The supply voltage (Vsup) should not exceed 10V volts in this IC power. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. Supplied with a operating current of 500nA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using NCP303, the base power ics number.

NCP303LSN26T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN26T1G Applications

There are a lot of ON Semiconductor NCP303LSN26T1G Voltage Supervisors applications.

• Power distribution systems of ICU
• Electronics installed in the vehicle
• Insulation fault location system
• Power distribution systems of operating room
• Important electronics for automotive protection
• Detection of phase loss
• Solar power charger
• Medical-specific insulation monitor
• Microprocessor system
• Utility meter