NCP303LSN29T1G Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SOT-23-5 Thin, TSOT-23-5 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The supply voltage (Vsup) should not exceed 10V volts in this IC power. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 500nA for the power management. You can always use NCP303, the base supervisor number, to search for similar PMICs of the manufacturer.

NCP303LSN29T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN29T1G Applications

There are a lot of ON Semiconductor NCP303LSN29T1G Voltage Supervisors applications.

• Military electronics
• Embedded computing
• DC stabilized power supply module
• Sensitive sensors
• Important electronics for automotive protection
• Precision measurement
• Microcontroller system
• Microprocessor system
• Multi-voltage system
• Automotive permanent magnet synchronous motors