NCP303LSN30T1G Overview

There are 5 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 1.5V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 500nA. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using NCP303, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 1.3μA.

NCP303LSN30T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN30T1G Applications

There are a lot of ON Semiconductor NCP303LSN30T1G Voltage Supervisors applications.

• Medical-specific isolation transformer
• Consumer electronics
• Urban rail transit weak current power monitoring
• emergency room
• Utility meter
• Precision measurement
• Network equipment
• Refrigeration
• Insulation fault location system
• Efficient information transmission