NCP303LSN32T1G Overview

It is mounted through 5 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 5 pins. Power managment ic pin count is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 500nA volt supply current. You can always use NCP303, the base supervisor number, to search for similar PMICs of the manufacturer.

NCP303LSN32T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN32T1G Applications

There are a lot of ON Semiconductor NCP303LSN32T1G Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Satellite navigation
• Leakage current detection
• DVR
• Radar
• Battery cars
• Utility meter
• Medical-specific isolation transformer
• Power distribution systems of infant care room
• Smart meter