NCP303LSN38T1 Overview

It is mounted through 5 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SOT-23-5 Thin, TSOT-23-5 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 240. During operation, the power ic is supplied with a voltage of 1.5V. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 500nA. It is always advisable to use NCP303, the base supervisor number, when searching for similar PMICs from the manufacturer.

NCP303LSN38T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP303LSN38T1 Applications

There are a lot of ON Semiconductor NCP303LSN38T1 Voltage Supervisors applications.

• FPGA design
• WiFi router
• Cloud computing
• Microprocessor system
• DC stabilized power supply module
• Set top box
• External alarm
• Consumer electronics
• Military electronics
• Telecommunications equipment