NCP304HSQ47T1G Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-82A, SOT-343 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 1.5V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 4 pins in it. There are 4 pins on the power managment ic. It is recommended that Vsup should not be less than 800mV for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 1μA volt supply current. It is always advisable to use NCP304, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 3.9μA.

NCP304HSQ47T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current

NCP304HSQ47T1G Applications

There are a lot of ON Semiconductor NCP304HSQ47T1G Voltage Supervisors applications.

• Power distribution systems of ICU
• FPGA design
• Dash board
• Low voltage/high power - AI, GPU
• Power distribution systems of infant care room
• Automotive power systems
• Battery-powered equipment
• Set top box
• Display equipment
• Computer applications