NCP304LSQ20T1 Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-82A, SOT-343 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. The supervisor is always powered by a 1.5V volt supply. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. 4 pins are present in total in this power management. There are 4 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 1μA. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP304, which is the base power ics number.

NCP304LSQ20T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current

NCP304LSQ20T1 Applications

There are a lot of ON Semiconductor NCP304LSQ20T1 Voltage Supervisors applications.

• Utility meter
• Smartphones
• Telecommunications equipment
• Detection of phase imbalance
• Automotive power systems
• FPGA design
• Medical-specific insulation monitor
• Power distribution systems of ICU
• Dash board
• Fire equipment power monitoring system