NCP304LSQ40T1G Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. Please find attached SC-82A, SOT-343 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 4. 4 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 1μA. It is always advisable to use NCP304, the base supervisor number, when searching for similar PMICs from the manufacturer.

NCP304LSQ40T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current

NCP304LSQ40T1G Applications

There are a lot of ON Semiconductor NCP304LSQ40T1G Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power communication system
• Leakage protection
• Multi-voltage system
• Display equipment
• Set top box
• Power distribution systems of operating room
• Microprocessor system
• Fire equipment power monitoring system
• Radar