NCP304LSQ45T1 Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-82A, SOT-343 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 240. A supply voltage of 1.5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. A total of 4 pins are located on this power management. 4 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 1μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using NCP304, the base power ics number.

NCP304LSQ45T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current

NCP304LSQ45T1 Applications

There are a lot of ON Semiconductor NCP304LSQ45T1 Voltage Supervisors applications.

• Power communication system
• Telecommunications equipment
• FPGA design
• Unattended substation automation
• Transformer load monitoring equipment
• Important electronics for automotive protection
• Electronics installed in the vehicle
• Leakage protection
• Display equipment
• Sensitive sensors