NCP304LSQ47T1 Overview

Power management is mounted through 4 terminals. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SC-82A, SOT-343 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 240. Manage ics operate at 1.5V supply voltages. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 4 pins that are attached to IC management. 4 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 1μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP304, which is the base power ics number. The IC management is rated for 70mA current.

NCP304LSQ47T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
Current rating of 70mA

NCP304LSQ47T1 Applications

There are a lot of ON Semiconductor NCP304LSQ47T1 Voltage Supervisors applications.

• Smartphones
• Solar power charger
• DSP
• Radar
• Important electronics for automotive protection
• Multi-voltage system
• Automotive power systems
• External alarm
• Electrical fire monitoring system
• Dash board