NCP305LSQ34T1 Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-82A, SOT-343 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 240. A supply voltage of 1.5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 4. This power management system has 4 pins. Supply voltage (Vsup) should be at least 800mV for this power management. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 1μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP305, which is the base power ics number.

NCP305LSQ34T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current

NCP305LSQ34T1 Applications

There are a lot of ON Semiconductor NCP305LSQ34T1 Voltage Supervisors applications.

• Network equipment
• Solar power charger
• Low voltage/high power - AI, GPU
• Battery-powered equipment
• Display equipment
• Consumer electronics
• DVR
• Detection of phase loss
• Insulation fault location system
• Detection of phase imbalance