NCP803SN293D2T1G Overview

It is mounted through 3 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 3. This power management has 3 pins. IC management can only work with a supply voltage of 1.2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~105°C TJ. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a 800nA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP803, which is the base power ics number.

NCP803SN293D2T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

NCP803SN293D2T1G Applications

There are a lot of ON Semiconductor NCP803SN293D2T1G Voltage Supervisors applications.

• DC stabilized power supply module
• Data storage applications
• Electronics installed in the vehicle
• Utility meter
• Network equipment
• Leakage protection
• Electrical fire monitoring system
• Digitally controlled LDO regulators circuit
• Transformer load monitoring equipment
• Urban rail transit weak current power monitoring