NCP803SN463D1T1G Overview

Power management is packaged in a Tape & Reel (TR) way. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The total number of pins on this power management is 3. 3 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is always advisable to use NCP803, the base supervisor number, when searching for similar PMICs from the manufacturer.

NCP803SN463D1T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

NCP803SN463D1T1G Applications

There are a lot of ON Semiconductor NCP803SN463D1T1G Voltage Supervisors applications.

• Efficient information transmission
• Transformer load monitoring equipment
• Power distribution systems of operating room
• Detection of phase sequence
• Display equipment
• Power distribution systems of CCU
• Important electronics for automotive safety
• Embedded computing
• Multi-voltage system
• Electrical fire monitoring system