NCP81147MNTXG Overview

Capsuled in the 16-VFQFN Exposed Pad package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~13.2V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. This switching controller can switch at 100kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Power Good. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. A variety of dc switching's functions can be performed on 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. There are a total of 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. 4.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 3.3V. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 95 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. Users should apply 13.2V to operate the voltage regulator dc to dc safely and reliably.

NCP81147MNTXG Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %

NCP81147MNTXG Applications

There are a lot of ON Semiconductor NCP81147MNTXG DC to DC converter applications.

• Surge protection circuits
• Smoke prevention equipment
• Product burn-in
• Planers
• Computed tomography (CT)
• Electric heating, lighting
• Automatic testing equipment
• Program control systems
• Computer application technology
• Experimental setup