NCV302LSN30T1G Overview

This power management consists of 5 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When 1.5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. A total of 5 pins are located on this power management. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use NCV302, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 1.3μA. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.

NCV302LSN30T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV

NCV302LSN30T1G Applications

There are a lot of ON Semiconductor NCV302LSN30T1G Voltage Supervisors applications.

• Power communication system
• Personal computers
• emergency room
• Set top box
• Microcontroller system
• Automotive power systems
• Leakage protection
• Radar
• Electrical fire monitoring system
• External alarm