NCV303LSN34T1G Overview

Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SOT-23-5 Thin, TSOT-23-5 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1.5V. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. 5 pins are present in total in this power management. This power management has 5 pins. It is recommended that Vsup should not be less than 800mV for this IC power. The supply voltage (Vsup) should not exceed 10V volts in this IC power. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. You can always use NCV303, the base supervisor number, to search for similar PMICs of the manufacturer. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.

NCV303LSN34T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV

NCV303LSN34T1G Applications

There are a lot of ON Semiconductor NCV303LSN34T1G Voltage Supervisors applications.

• Important electronics for automotive protection
• Electric heating appliances
• Detection of phase imbalance
• Personal computers
• Stable power system
• DC stabilized power supply module
• Display equipment
• Set top box
• emergency room
• Automotive permanent magnet synchronous motors