NCV303LSN49T1 Overview

This power management consists of 5 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SOT-23-5 Thin, TSOT-23-5 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. In a 1.5V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 500nA. If you want to search for similar IC managements of this manufacturer, you can always refer to NCV303, which is the base power ics number. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.

NCV303LSN49T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCV303LSN49T1 Applications

There are a lot of ON Semiconductor NCV303LSN49T1 Voltage Supervisors applications.

• Detection of phase loss
• Computer applications
• Electric heating appliances
• Efficient information transmission
• Low voltage/high power - AI, GPU
• External alarm
• Medical-specific insulation monitor
• DC stabilized power supply module
• Set top box
• FPGA design