NCV887001D1R2G Overview

With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 3.2V~40V volts and has 3.2V~40V supply voltage. Workable in an dc switcher where -40°C~150°C TJ is the -40°C~150°C TJrm. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Current Limit, Enable which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 13.2V. In addition to "NCV8870", there are other relevant dc to dc converter ics you can find. There are only 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Test statistics indicate DC regulator outputs 10.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 800mA, so you should note it down when starting a new project. voltage regulator dc to dcs with a 95 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount qualifies it for most applications and prototypes. 100kHz is the frequency of the switching controller. In order to limit the voltage of a dc switcher whose maximum input voltage is 40V, it must be limited by the user. The supply voltage must be 3.2V. An output current greater than 100μA cannot be provided by the dc switcher. A datasheet states that the switching converter can output 2.5V volts at its maximum. There is 300mV voltage output lower than 300mV on the voltage controller.

NCV887001D1R2G Features

Transistor Driver Outputs
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 100kHz

NCV887001D1R2G Applications

There are a lot of ON Semiconductor NCV887001D1R2G DC to DC converter applications.

• Large fire protection systems
• Alternators
• Medical monitoring systems
• Computed tomography (CT)
• Linear guide
• Smart grid
• seismic instrument power circuits
• Elevator lighting
• Computer-related products
• Industrial robots