NE5532AN Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. This electronic part is best mounted with type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. Using an 8mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 100dB at all times. On this instrumentation amplifier, there are 2 circuits that are connected together. The operating supply voltage of instrumentation amplifier is rated 20V voltage. The instrumentation amplifier is packed in the form of RAIL.
NE5532AN Features
8 Pins
supply voltage of 15V
100dB voltage gain
NE5532AN Applications
There are a lot of ON Semiconductor NE5532AN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- High speed sample
- Image computer boards
- Power control
- Hand-held batteries
- Weighing systems
- Addition operation circuits
- Automatic control
- Wireless base stations
- Differentiator circuits
