NIS5232MN1TXG Overview

There is an inclusion of buck boost converter in the package Tape & Reel (TR).In the way voltage regulator is packaged, voltage regulator is in the form of a 10-VFDFN Exposed Pad.In this case, Surface Mount holds the current regulator in place.Current regulator is recommended that the operating temperature not exceed -40°C~150°C.As far as input voltage goes, current regulator supports the value of 9V~18V.As well as 10 terminations, there are also 10 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.In a computer or other communication constant current regulator, 10 pins are pronged contacts that provide a signal interface.This electronic part is mounted in the way of Surface Mount.The supply voltage of this electrical constant current is 12V.With its high output current, 4.2A is capable of offering maximum design flexibility.The analog IC used in this power converter is POWER SUPPLY SUPPORT CIRCUIT.Channels are becoming stronger/weaker based on the following statistics: 1.Part Power Management Circuits consists of these current regulations as well as other current regulations.A higher voltage (Vsup) is required for the supply than the voltage 9V.Upon reaching 18V, the maximum voltage supply (Vsup) is provided for the boost converter's operation.Power is provided by 12V power supplies.The resistance of the electrical dc to dc converter is 44mOhm (Ω).

NIS5232MN1TXG Features

Tape & Reel (TR) package
12V power supplies

NIS5232MN1TXG Applications

There are a lot of ON Semiconductor NIS5232MN1TXG Current Regulation/Managements applications.

• Over current monitor
• Battery management
• Industrial applications current measurement
• Vehicle dynamic controls
• Over-current measurement
• Power supply current measurement
• Suspension controls
• Engine management
• Battery chargers
• Over-current protection