NLAS2066UST3G Overview

Due to its 8-VFSOP (0.091, 2.30mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 8. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. A SPST - NO switching circuit is used for these analog switches. Use NLAS2066 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 7Ohm. To find out what the 8 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 1.65V. The analogue multiplexer could operate on 1μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. This analog switch ic utilizes SEPARATE OUTPUT output. 3V operating voltages can be used with this electrical part. A 2 input needs to be operated.

NLAS2066UST3G Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 186MHz

NLAS2066UST3G Applications

There are a lot of ON Semiconductor NLAS2066UST3G Analog Switches & Multiplexers ICs applications.

• SONET
• Frame Relay Equipment
• FTTH
• Cable Modem
• Industrial control systems
• Precision instrumentation
• Audio and video routing
• PDAs
• New designs requiring multiplexer functions
• PCMCIA cards