9ns, 10ns SPST - NO 25Ohm DUAL Analog Switches NLAS4501 5 Pins 1nA 3V SOT-23-5 Thin, TSOT-23-5
SOT-23
NLAS4501DTT1 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Lifecycle Status
OBSOLETE (Last Updated: 4 days ago)
Mounting Type
Surface Mount
Package / Case
SOT-23-5 Thin, TSOT-23-5
Surface Mount
YES
Number of Pins
5
Operating Temperature
-55°C~125°C TA
Packaging
Tape & Reel (TR)
Published
2007
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
5
Resistance
25Ohm
Terminal Finish
Tin/Lead (Sn80Pb20)
Subcategory
Multiplexer or Switches
Max Power Dissipation
200mW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3V
Reach Compliance Code
not_compliant
Time@Peak Reflow Temperature-Max (s)
30
Base Part Number
NLAS4501
Pin Count
5
Qualification Status
Not Qualified
Operating Supply Voltage
5V
Number of Channels
1
Number of Circuits
1
Max Supply Voltage
5.5V
Min Supply Voltage
2V
Operating Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
14 ns
Supply Type
Single
Turn-Off Delay Time
22 ns
-3db Bandwidth
220MHz
On-State Resistance (Max)
25Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
93 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
10pF 10pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
9ns, 10ns
Charge Injection
3pC
Voltage - Supply, Single (V+)
2V~5.5V
Normal Position
NO
Length
3mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
NLAS4501DTT1 Product Details
NLAS4501DTT1 Overview
Presented in SOT-23-5 Thin, TSOT-23-5, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 5 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 5 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 1. Using the NLAS4501 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 25Ohm. For details about the functions of 5 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage the electrical component should receive. For this digital switch to work, 1μA current would suffice. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. Putting voltage greater than 1μA on the multiplexer may cause damage. The electrical part can be operated at 5V voltage levels.
NLAS4501DTT1 Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current -3db Bandwidth: 220MHz
NLAS4501DTT1 Applications
There are a lot of ON Semiconductor NLAS4501DTT1 Analog Switches & Multiplexers ICs applications.
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)