UC2842BN Overview

Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 10V~30V. Worked in a -25°C~85°C TA dc switcher before. There is a switch at Up to 500kHz that can be used with this controller. The Through Hole allows it to be used for dc dc regulator in general. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. 8 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. UC284*B can be searched for other relevant dc to dc converter ics. There are 8 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. As determined by the test statistics, the output voltage of DC regulator is 13.5V. The dc to dc regulator is limited to 25V input voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 96 % to ensure reliability during power-up and power-down. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 30V.

UC2842BN Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %

UC2842BN Applications

There are a lot of ON Semiconductor UC2842BN DC to DC converter applications.

• Printing equipment
• Linear guide
• Boring machines
• ATMs
• Thermal power
• Product burn-in
• Correction machines
• Direct power supply system
• Driver circuits
• Grinders