AN30888A-VF Overview
In order to save board space, the 16-LSSOP (0.173, 4.40mm Width) package is used. A LED driver with 1 outputs is designed.It is mounted using Surface Mount.The system emerges as a DC DC Controller with high efficiency.The led light driver operates normally at -25°C~85°C TA. There are considerable benefits for Backlight, Lighting.In the 1.2MHz frequency range, it operates.There are 16 pins on its base.Undetermined failures may occur if the voltage supply falls below 3V.The device has been mounted on the Surface Mount.The LED driver can be found under the base part number AN30888.It is acceptable to operate with a supply voltage of 20V.An optimal value of supply voltage is 20V.With a minimum input voltage of 3V volts, it can operate.When the maximum supply current is allowed, the value reaches 20V.In order to maintain maximum efficiency, the supply current cannot exceed 15mA.The operating temperature should not exceed 85°C to ensure stable operation.The load is capable of receiving 1.6A current.It is necessary to maintain a higher operating temperature than -25°C in order to achieve stable operation.As long as the switching frequency is maintained at 1.5MHz, this electronic component is able to perform all of its functions properly.4.3V is the voltage at the output terminal.
AN30888A-VF Features
Available in the 16-LSSOP (0.173, 4.40mm Width) package
Operating temperature of -25°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.5MHz
Output voltage of 4.3V
AN30888A-VF Applications
There are a lot of Panasonic Electronic Components AN30888A-VF LED Driver ICs applications.
- Museum lighting
- LED headlights
- Down lighting
- Portable lighting
- LED Lighting PFCs, Linear Dimmable
- Linear fluorescent
- LED Lightings for Industrial Equipment
- Panel lighting
- Amusement Machines
- LED backlight driver for LCD displays for Tablets and Note PCs
