LNK420LG Overview

There is a 7-SSIP, 6 Leads, Exposed Pad, Formed Leads package on the board that is used to save space. LED drivers design with 1 outputs.Through Hole is used to mount the led light driver.With high efficiency, it appears as a AC DC Offline Switcher.LED drivers capable of operating at -40°C~150°C TJ can be used.Lighting has many advantages.Frequency 66kHz is the basis of operation.It has a base of 6 pins.Undetermined failures may occur if the voltage supply falls below 36V.It's mounted in Through Hole.It is acceptable to supply voltages of 725V.When the input voltage is set to 85V, it operates.This electronic component can fully perform when the switching frequency is 66kHz.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 9A.Several applications make use of this LED driver from the LinkSwitch?-PH series.725V should be the maximum output voltage.-300mV is the minimal voltage it outputs.

LNK420LG Features

Available in the 7-SSIP, 6 Leads, Exposed Pad, Formed Leads package
Operating temperature of -40°C~150°C TJ
Frequency of 66kHz
Switching frequency of 66kHz

LNK420LG Applications

There are a lot of Power Integrations LNK420LG LED Driver ICs applications.

• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Refrigeration lighting
• Sports Facility Lighting
• Panel lighting
• Down lights
• Auxiliary lights for on-vehicle cameras
• Replacement lamps
• LED Lightings for Inspection Devices
• Constant Voltage Power Source for portable equipment
• Medical surgery lighting