LNK606PG Overview

In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.This AC DC converter employs ANALOG CIRCUIT analog IC type.When the switching frequency reaches Up to 85kHz , the circuit is closed.Total terminations are 8 .Approximately 8 pins are present on the ac/dc converter.There are 8 pins in the ac-dc converter.Through Hole are the recommended mounting method for the ac dc converters.It belongs to a manufacturer family of LinkSwitch?-II .There are 1 outputs to run.In this AC to DC transformer, the output current is set to 438mA .The voltage output by this AC/DC converter is 6V .High efficiency can be achieved when AC to DC converters frequency is set to 66kHz .SVHC for REACH can be found in the standard No SVHC .Input voltages under 265V can be used to power the AC to DC converter.Coverters generate 6.1W in terms of output power.An input voltage of less than 85V V is required to operate the AC to DC inverter.A minimum voltage supply across the converter is 85V .265V is the maximum supply voltage across the converter.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.

LNK606PG Features

Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 438mA

LNK606PG Applications

There are a lot of Power Integrations LNK606PG AC DC Converters applications.

• AC/DC LED Driver applications
• Set -Top Box (STB) Power Supply
• Replaces linear transformers
• AC--DC Adapter
• Power tools fast chargers with trickle and on/off
• Z-Wave
• Humidifier
• Automotive Clusters
• Standby Power for General Off-Line Applications
• Battery Chargers