R1LP0108ESF-5SR#B0 Overview

As far as its memory type goes, it falls into the Volatile category. You can get memory ics in a Tray case. The case is embedded in 32-TFSOP (0.724, 18.40mm Width). On the chip, there is an 1Mb 128K x 8 memory, which is the size of the chip's memory. Memory data is stored in SRAM-format, which is common in mainstream devices. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of 0°C~70°C TA. With 4.5V~5.5V as the supply voltage, it is capable of handling memory ics. The recommended mounting type for memory ics is Surface Mount. A total of 32 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. An 5V supply is required for this ic memory chip to operate properly. It is common to select similar parts by referring to the device's base part number, R1LP0108E. In this ic memory chip, there is an 32-pin package that encloses the device. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. In terms of its nominal supply current, this memory component is rated at 35mA. Each memory address is accessed by one of 1 ports on this chip. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory.

R1LP0108ESF-5SR#B0 Features

Package / Case: 32-TFSOP (0.724, 18.40mm Width)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

R1LP0108ESF-5SR#B0 Applications

There are a lot of Renesas Electronics America R1LP0108ESF-5SR#B0 Memory applications.

• eSRAM
• personal computers
• telecommunications
• networking
• networks
• personal digital assistants
• printers
• workstations,
• embedded logic
• Cache memory