LPC660AIMX

join

new-10%

Manufacturer part number:LPC660AIMX

Manufacturer:Rochester Electronics

Description:40mA per Channel 2 fA 70 dB Instrumentational OP Amps SOIC

Case Package:SOT-23

Datasheet:LPC660AIMX Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Mount	Surface Mount
Package / Case	SOIC
Number of Pins	14
Packaging	Tape and Reel
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	4
Max Supply Voltage	15V
Min Supply Voltage	5V
Operating Supply Current	160μA
Nominal Supply Current	160μA
Current - Output	40mA
Slew Rate	0.11 V/μs
Common Mode Rejection Ratio	70 dB
Current - Input Bias	2 fA
Output Current per Channel	40mA
Input Offset Voltage (Vos)	3mV
Gain Bandwidth Product	350 kHz
Voltage Gain	120dB
Power Supply Rejection Ratio (PSRR)	70dB
Max Dual Supply Voltage	7.5V
Min Dual Supply Voltage	2.5V
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

Quantity	Unit Price	Ext. Price
1	$1.945312	$1.945312
10	$1.835200	$18.352
100	$1.731321	$173.1321
500	$1.633321	$816.6605
1000	$1.540869	$1540.869

LPC660AIMX Overview

In the package, you will find a SOIC-case to contain the op amp ic. A Tape and Reel case is used for delivering the op amp. The op amp ic has an array of 14 pins on it. Op amp rates 3mV as input offset voltage. Using an 160μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 4 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 15V as far as supply voltage is concerned. A voltage of 5V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 7.5V volts when you conduct this part.