DG409CY+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SP4T switching circuits. A total of 2 circuits make up this switch device. Search with DG409 if you are looking for analog multiplexer variants. It has an internal resistance of 175Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 30V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. In the case of dual power supplies, you should connect at least 5V. There is a voltage range of 28V operating voltages for the electrical part.

DG409CY+ Features

8 Channels
Switch Circuit: SP4T
500μA Supply Current

DG409CY+ Applications

There are a lot of Maxim Integrated
DG409CY+ Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems