MAX698CWE+ Overview

There are 16 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are 16-SOIC (0.295, 7.50mm Width) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 3V. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 16 pins on power management. It is recommended that Vsup should not be less than 3V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: 0°C~70°C TA. There is an output voltage of Open Drain, Push-Pull from this supervisor when it is operating. There is a supply current of 5mA for the power management. You can always use MAX698, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 3.3/5V volts of power.

MAX698CWE+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
5mA operating supply current

MAX698CWE+ Applications

There are a lot of Maxim Integrated MAX698CWE+ Voltage Supervisors applications.

• Sensitive sensors
• Digitally controlled LDO regulators circuit
• Unattended substation automation
• Rechargeable batteries
• Cloud computing
• Radar
• Low voltage/high power - AI, GPU
• Smartphones
• Medical-specific insulation monitor
• Power distribution systems of ICU