MAX6375UR23+T Overview

A total of 3 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 3. The pins of the power management system count 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 1μA. It is always advisable to use MAX6375, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6375UR23+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current

MAX6375UR23+T Applications

There are a lot of Maxim Integrated MAX6375UR23+T Voltage Supervisors applications.

• Functional modules
• Solar power charger
• Multi-voltage system
• Battery cars
• Magnetic resonance imaging
• FPGA design
• Electric heating appliances
• Military communications
• Network equipment
• Urban rail transit weak current power monitoring