MAX6819UT+T Overview

It is mounted through 6 terminals on the power management. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a SOT-23-6 package. Compared to other Sequencer products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, it has 6 pins on IC management. There are 6 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 900mV. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. There is a supply current of 60μA for the power management. It is always advisable to use MAX6819, the base supervisor number, when searching for similar PMICs from the manufacturer. Essentially, this IC management is made up of 1 circuits.

MAX6819UT+T Features

Sequencer type
Minimum supply voltage of 900mV
60μA operating supply current
1 circuits

MAX6819UT+T Applications

There are a lot of Maxim Integrated MAX6819UT+T Voltage Supervisors applications.

• Leakage current detection
• Detection of phase loss
• Detection of phase imbalance
• DSP
• Military electronics
• Cloud computing
• Power distribution systems of ICU
• Leakage protection
• Personal computers
• Military communications