MAX791ESE+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. Please find attached 16-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, it has 16 pins on IC management. This power management system has 16 pins. IC management can only work with a supply voltage of 0V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 150μA. You can always use MAX791, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 150μA.

MAX791ESE+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
150μA operating supply current

MAX791ESE+ Applications

There are a lot of Maxim Integrated MAX791ESE+ Voltage Supervisors applications.

• Consumer electronics
• Radar
• Stable power system
• Power distribution systems of infant care room
• Utility meter
• DC stabilized power supply module
• Smart meter
• Battery cars
• Unattended substation automation
• Cloud computing