74LVT574SJ Overview

In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. D flip flop is embedded in the Tube package. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2.7V~3.6Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74LVT series. Its output frequency should not exceed 150MHz Hz. D latch consists of 1 elements. T flip flop consumes 190μA quiescent energy. A total of 20 terminations have been made. A voltage of 3.3V provides power to the D latch. A JK flip flop with a 4pFfarad input capacitance is used here. It belongs to the family of electronic devices known as LVT. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2.7V. The flip flop contains 2ports. Additionally, you may refer to the additional BROADSIDE VERSION OF 374 of the electronic flip flop.

74LVT574SJ Features

Tube package
74LVT series

74LVT574SJ Applications

There are a lot of Rochester Electronics, LLC 74LVT574SJ Flip Flops applications.

• Bounce elimination switch
• Communications
• Guaranteed simultaneous switching noise level
• High Performance Logic for test systems
• Buffer registers
• ESCC
• Shift registers
• ATE
• CMOS Process
• Pattern generators