ADF4106BCP-REEL7 Overview

Clock generator is packaged in the way of Tape & Reel (TR). A Clock PLL is included with the 20-WFQFN Exposed Pad, CSP package. This clock generator will sustain a maximum temperature of 240 when reflown. As you can see, it consists of 20 terminations. The clock generator ic should be grounded with a voltage of 3V. As the Clock PLL's input, CMOS is designed to be used in order to generate the clock signal. An upper frequency limit of 6GHz Max can be achieved with this clock-based frequency synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. This clock generator would require a maximum supply voltage of 3.3V. For safety reasons, this frequency generator's supply voltage should remain above 2.7V. Clock generator ic works with 2.7V~3.3V. A frequency generator that runs over 85°C may cause ha85°Cards. If the ambient temperature is below -40°C, the clock PLL may not start up. The frequency synthesizer in this product is compatible with all levels of Clock logic. Clock/Frequency Synthesizer (RF) is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors.

ADF4106BCP-REEL7 Features

Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V

ADF4106BCP-REEL7 Applications

There are a lot of Rochester Electronics, LLC ADF4106BCP-REEL7 Clock Generators applications.

• Cable television converter boxes
• Wireless infrastructure
• Wireless base station for LTE, LTE-advanced
• Electronic equipment
• Myriad digital applications
• FSK demodulators
• Main oscillator in receiver
• Ports
• Frequency synthesis
• High-speed optical transport network (OTN)