ADF4153BRU Overview

This clock IC is packaged using the Tube method. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible. In it, there are 16 terminations to be found. The clock generator ic should be grounded with a voltage of 3V. In this case, CMOS, TTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 4GHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. This clock generator would require a maximum supply voltage of 3.3V. In order to maintain safety, this frequency generator should be supplied with voltages above 2.7V. As far as the supply voltage is concerned, clock PLL can be used with 2.7V~3.3V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of Clock logic. Fractional N Synthesizer (RF) is the type of electrical part that this component is classified as. Microprocessor-specific clock PLL with 16 bits.

ADF4153BRU Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V

ADF4153BRU Applications

There are a lot of Rochester Electronics, LLC ADF4153BRU Clock Generators applications.

• VSAT (Small Ground Satellite Station)
• CB radios
• Microwave radio
• Radar
• Clock generation systems
• 10 Gigabit Ethernet
• Cell phones
• Electronic countermeasures
• Bluetooth transmitters
• Motor speed controls