ADF4212BRU Overview

This clock IC is packaged using the Tube method. 20-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. This clock generator ic can sustain 240 degrees of temperature during reflowing. There are a total of 20 terminations in this file. A voltage of 3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be CMOS. It provides a maximum frequency of 2.7GHz. The Surface Mount allows this electrical component to be easily installed on the panel. The maximal supply voltage this clock generator would take is 5.5V. The supply voltage (Vsup) should be kept above 2.7V for normal operation. As long as you provide 2.7V~5.5V supply voltage, it will work. A frequency generator that runs over 85°C may cause ha85°Cards. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. This is a clock generator compatible with Clock logic levels. Clock/Frequency Synthesizer (RF/IF) is the type of electrical part that this component is classified as. It is a 20-bit IC that is designed for microprocessors specifically.

ADF4212BRU Features

Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V

ADF4212BRU Applications

There are a lot of Rochester Electronics, LLC ADF4212BRU Clock Generators applications.

• PMR (Professional Mobile Radio)
• Main oscillator in receiver
• Signal analyzer
• Multi-function printers
• Digital circuits
• VSAT (Small Ground Satellite Station)
• GPS systems
• Clock generation systems
• Space communucation
• Radar