ASM3P2779AF-06OR Overview

It is packaged using the Tape & Reel (TR) method since it is a clock IC. This clock generator is embedded in the SOT-23-6 Thin, TSOT-23-6 package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 6 terminations in this file. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. There is a maximum frequency of 30MHz Max with this clock-based frequency generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.375V~3.6V provided with this RF synthesizer. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. CMOS is designed for clock generator's output. Frequency Modulator, Spread Spectrum Clock Generator is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors. This clock PLL features CAN ALSO OPERATES AT 3.3V SUPPLY for better clock signal output.

ASM3P2779AF-06OR Features

Available in the SOT-23-6 Thin, TSOT-23-6
Supply voltage of 2.5V

ASM3P2779AF-06OR Applications

There are a lot of Rochester Electronics, LLC ASM3P2779AF-06OR Clock Generators applications.

• Microwave backhaul IF
• Quenching?
• Clock generation systems
• Bluetooth receivers
• Clock signals to the high-speed Digital RF circuits
• Automatic control
• Modems
• Instrument
• FPGA and processor clocks
• Mechanical devices