CY29949AXC Overview

The clock divider is packaged in a 52-TQFP case. There is a case available for the circuit clock in Tray. In normal operation, the maximum value is set to 200MHz. A total of 52 terminations are present. Supply voltages of 2.5V allow for high efficiency. As far as I can tell, it is mounted by Surface Mount. An electronic component classified as Fanout Buffer (Distribution), Divider, Multiplexer is categorized as such. It is recommended to set the temperature to 0°C~70°C so the system can perform reliably. Ideally, it should be able to operate from 2.375V~3.6V volts. It has a pin count of 52 on it. As a result, it produces LVCMOS, LVTTL. The gadget belongs to the 29949 family. A maximum supply voltage (Vsup) is set to 2.625V. As a general rule, the supply voltage (Vsup) should be maintained above 2.375V. It is also possible to obtain CAN ALSO OPERATE AT 3.3V SUPPLY when using this gadget.

CY29949AXC Features

52 terminations
The operating temperature of 0°C~70°C degrees

CY29949AXC Applications

There are a lot of Rochester Electronics, LLC CY29949AXC Clock Buffers & Drivers applications.

• Measurement test
• Network attached storage
• Mass storage system
• Patient diagnosis
• Industrial automation control system
• Medical instruments
• High-end consumer electronics
• Navigation equipment
• Edge computing
• High-speed flip-flop