CY7B9910-2SXC Overview

Tube-method packaging is used for clock ICs. The 24-SOIC (0.295, 7.50mm Width) package includes this clock generator. As you can see, it consists of 24 terminations. To operate this time clock generator, 5V voltage should be applied. A clock generator's input is called Clock and it is designed as the input for this clock generator. To access the full performance of the electronic component, 1 circuits are implemented. The frequency generator has a maximum frequency of 80MHz. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 5.5V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 4.5V. Clock generators should operate with the voltage supply of 4.5V~5.5V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. There are several logic levels in TTL logic that can be used with this clock generator. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. This clock generator offers low timing skew at 0.25 ns Max. The 7B family of parts can be used to find electric parts that are similar to each other.

CY7B9910-2SXC Features

Available in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V

CY7B9910-2SXC Applications

There are a lot of Rochester Electronics, LLC CY7B9910-2SXC Clock Generators applications.

• High-frequency induction heating
• Quenching?
• Peripheral devices
• FMCW Radar
• 1 Gigabit Ethernet
• Motor speed controls
• Skew suppression
• Small signal recovery
• Automatic control system test
• Reference signals to RF systems