DS1013M-12 Overview

For cost-effective packaging, Tube is used. By using the 8-DIP (0.300, 7.62mm) package, applications are no longer required to use additional insulating hardware. In order to ensure reliable performance, 5V is supplied with a voltage. As its mounting method, Through Hole is used. Taps and steps are configured with 1. At DUAL, the terminals are located. For a unique configuration, it is equipped with 8 terminations. When operating, 5V receives a supply voltage. It uses the logic type SILICON DELAY LINE. A minimum supply voltage of 4.75V is acceptable for its operation. Providing a maximum supply voltage of 5.25V is acceptable. It is a key active component of the CMOS family. The combination of its BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT with other specific characteristics makes it ideally suited for a wide range of applications.

DS1013M-12 Features

Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
stay resistance at CMOS

DS1013M-12 Applications

There are a lot of Rochester Electronics, LLC
DS1013M-12 Delay Lines Timing ICs applications.

• Switch Debouncing
• High Vibration, High Acceleration Environments
• Portable and Battery-Powered Equipment
• Clock Synchronization
• Digital Systems
• Embedded Systems
• Utility Meters
• Security Systems
• Network Hubs, Bridges, and Routers
• QDR/QDRII Memory Systems