DS21610SN Overview

This clock IC is packaged using the Tube method. There is a clock generator embedded in the 16-SOIC (0.295, 7.50mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 245. As you can see, it consists of 16 terminations. This electronic frequency generator requires a voltage of 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. To access the electronic component's full performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 8.192MHz Max. Surface Mount-slots make it easy to mount this electronic component on panels. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~5.25V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. An electrical part such as this one can be classified as a Clock Rate Adapter component. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. According to the base part number DS21610, its related parts can be found. Clock generator is designed with 16 pins. In terms of the supply voltage, analog clock generator can handle 5V volts. A frequency synthesizer with ALSO OPERATES AT 5V SUPPLY features better clock signal output. Analog clock generator is configured with 2 pins that enable the high true output. In order for it to fully perform time clock generator's functions, it needs a supply current of 14mA.

DS21610SN Features

Available in the 16-SOIC (0.295, 7.50mm Width)
Supply voltage of 3.3V
Operating supply voltage of 5V
2 true outputs

DS21610SN Applications

There are a lot of Maxim Integrated DS21610SN Clock Generators applications.

• Electronic countermeasures
• Mechanical devices
• Signal generator
• 10 Gigabit Ethernet
• Automatic control
• Bit synchronization
• Bluetooth transmitters
• Coherent carrier tracking
• Antenna automatic tracking
• VSAT (Small Ground Satellite Station)