MAX4663CPE+ Overview

Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. It consists of 4 circuits. Using the MAX4663 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 2.5Ohm. To find out what the 16 pins do, please refer to the datasheets. Users shouldn't supply more than 36V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 4.5V should be applied to the electronic component. If put voltage greater than 500nA on the device, damage may be caused to the analogue multiplexer. There is no problem with using dual supply voltage, but it should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. Operating voltages range from 20V.

MAX4663CPE+ Features

1 Channels
Switch Circuit: SPST - NO/NC

MAX4663CPE+ Applications

There are a lot of Maxim Integrated MAX4663CPE+ Analog Switches & Multiplexers ICs applications.

• Video switching
• Fiber to the Home
• MP3 players
• Relay replacements
• Medical systems
• Digital cross connects (DSX-1)
• Microprocessor controlled systems
• Public switching systems
• Low-Voltage
• High-Voltage