MAX9691EPA+ Overview

In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .A comparator with an output type of Complementary, ECL is being used.We ship the part through Tube .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as with Latch .A total of 1 elements can be found in it.A total of 8 pins are included.A Through Hole mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for MAX9691 to find more pin-to-pin solutions for your specific needs.There is 26mA current flowing in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 26mA .A current supply greater than 26mA may cause the comparator to malfunction.The device can be run with 5-5.2V power supplies.Comparator electronics follows that the voltage gain of the part is 70dB .

MAX9691EPA+ Features

Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB

MAX9691EPA+ Applications

There are a lot of Maxim Integrated
MAX9691EPA+ linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications